Mfrs. of: CORONA TREATER & STATIC ELIMINATOR









::  Woven Sacks Treatment System  ::

AG. Corona Treater, Roll To Roll Corona Treatment System, Sheet / Bag to Bag Corona Treatment System, Woven Sacks Treatment System, Reverse Corona Treatment, Dyne Level Measurement, AG. IGBT Induction Cap Sealing Machine,AG. Static Eliminator, Hot Bar Electrode System, Shockless Electrode System, Air Models, AG. Static Charger / AG. Velvete Flocking System, Static Eliminator, Corona Treater.

Woven Sacks Treatment System
APPLICATIONS

1. AG. Roll to Roll TREATMENT SYSTEMS
2. AG. TREATMENT SYSTEMS FOR LAMINATION 
3. AG. TREATMENT SYSTEMS FOR FLEXO PRINTING.
AG. TREATMENT SYSTEM FOR BOPP COATING

AG. CORONA TREATMENT SYSTEM FOR ROLL TO ROLL OPTIONAL FEATURES : 

1. Pneumatic operated treater station using filtered air from 60-120 p.s.i. Cylinders are controlled by manual or electronic air valve with switch. 
2. Ozon extraction system efficiently remove ozone and to cool the electrode. This reduces warping of the electrode and provides more consistent treatment across the web. Increase the life of silicone sleeve. To protect the operator from excess ozone gas. 
3. Aluminium frame featuring stainless steel enclosure Station. 
4. In order to protect the treater rolls, zero speed switch automatically shuts down the output power , when the web reaches slow speed less than set speed. 
5.Stainless steel segmented electrode 
6. Bare Roller System. 
7.Easy view windows allow clear unobstructed view of corona discharge. 


Technical Specifications 

* Treat width capacity :4 " to 48" webs.
* Treater roll :2"/ 3” /4” diameter.
* Idler roll : 2"/ 3” diameter.
* Maximum line speed : 15 to120 meter per minute.
* Treat capability : One or two sides.
* Mains supply : 440V,AC ± 5 %,1 Ø.
* Mains frequency : 50 Hz ± 5 %.
* Output frequency : 15 to 25 Khz.
* App. output power : 3/5/10 KW.
* Electrodes: Multisegment / Multiblade.

AG. ELECTRONICS SHEET FORM /BAG TO BAG TREATMENT SYSTEM 

APPLICATIONS

1. OFFSET PRINTING ( laminated metalised / non metalised cardboard / pvc sheet / polyester sheet / LD / LLDP / HM BAGS SHEETS. )
2. MANUAL FLEXO PRINTING FOR WOVEN SACKS BAGS ( FERTILIZER, LAMINATED, REVERSE BAGS )

Technical Specifications 

* Treat width capacity :4 " to 48" webs. 
* Treater roll :2"/ 3” /4” diameter. 
* Idler roll : 2"/ 3” diameter. 
* Maximum line speed : 6 to 60 meter per minute. 
* Treat capability : One or two sides. 
* Mains supply : 230 V,AC ± 5 %,1 Ø. 
* Mains frequency : 50 Hz ± 5 %. 
* Output frequency : 15 to 25 Khz. 
* App. output power : 1 / 1.5 / 2 Kw. 
* Electrodes: INSULATED ROLL ELECTRODE with motor hp .5/1/2/hp DC motor with panel for Speed variation 
Zero speed switch. 
With or without belt conveyer for paper feeding Systems 
Compact design for comfortable to installation / operate / Quality. 

Contact : B/24, Savitridham, W.S. Marg, Dahisar (E), Mumbai-400 068, Maharashtra, India 
Tel : (022) 65791568 / 28283179  Telefax : (022) 28970079 
Contact : Mr. John - Proprietor   Cell : 9821841653
E-mail : response@agtreaters.com

Work Office :-
Manisha Industrial Estate No : 2, Unit No. : 150, 1st Floor, Navghar Vasai- East,
Thane. Pin. - 401210        /      Tel. No. : 0250 - 2390086

  Designed & Hosted by : MID   Promoted by : GID