Mfrs. of: CORONA TREATER & STATIC ELIMINATOR









::  Air Models  ::

AG. Corona Treater, Roll To Roll Corona Treatment System, Sheet / Bag to Bag Corona Treatment System, Woven Sacks Treatment System, Reverse Corona Treatment, Dyne Level Measurement, AG. IGBT Induction Cap Sealing Machine,AG. Static Eliminator, Hot Bar Electrode System, Shockless Electrode System, Air Models, AG. Static Charger / AG. Velvete Flocking System, Static Eliminator, Corona Treater.

Compressed Air Gun, Knife, nozzles, blower, Fan Cadet

Air Models

It is the ideal way to remove static, contaminants and dust from three dimensional parts prior to assembly, packaging, painting or finishing. The Ion Air Gun neutralizes static electricity and cleans at distances up to 2 feet .

COMPRESSED AIR GUN STATIC ELIMINATOR

When ordinary compressed air is used to remove dust, its efficiency is limited. If the static charge holding the dust to the product is not neutralized, both the dust and the product will remain statically charged and capable of recontamination. The Ion air gun is a rugged, industrialized ionizing air gun used to eliminate static charges and blow off contaminants from the surface of plastics, rubbers, glass and laminated woods. At the same time the neutral surface does not re-attract airborne contaminants from the manufacturing process. 

If the compressed air is ionized, the static charge will be eliminated, allowing high quality cleaning without re- attraction 

The users of this gun will enjoy many hours of fatigue-free operation.
Air Models

Applications :

* Pre-paint dust removal
* Clean and neutralize three dimensional plastic parts 
* Optics 
* Electronics assemblies 
* automobile bodies 
* Cleaning molded parts 
* Photo finishing 
* Lens cleaning 
* Furniture finishing 
* Package cleaning 
* Container neutralization
 

Advantages :

*  Rugged, lightweight, easy to use  
*  Rapid static decay  
*  Low air consumption
*  Quiet  
*  Effective up to 15 feet (4.6m)  
*  Strong blow off force and flow  
*  Low maintenance

Power Unit: Use with the 331 Power Unit. 

Airflow :- The air must be clean and dry.
Typical working pressure 3 - 5 Bar
Air consumption: at 3 Bar : 190 lit/min; at 5 Bar: 250 lit/min.
Air connection is 1/4 BSP

Contact : B/24, Savitridham, W.S. Marg, Dahisar (E), Mumbai-400 068, Maharashtra, India 
Tel : (022) 65791568 / 28283179  Telefax : (022) 28970079 
Contact : Mr. John - Proprietor   Cell : 9821841653
E-mail : response@agtreaters.com


Work Office :-
Manisha Industrial Estate No : 2, Unit No. : 150, 1st Floor, Navghar Vasi- East,
Thane. Pin. - 401210        /      Tel. No. : 0250 - 2390086

  Designed & Hosted by : MID   Promoted by : GID